Christmas Chandelier LED Tea Lights 100% Printable

Heyhoooo 



Here I have a Christmas Chandelier that can hold 4 x LED Tealights.

I designed it to be 100% printable and no other hardware parts than the lights are required.

The Holder for the lights have a diameter of about 38 mm and a height of around 20 mm. 

If you only have access to LED- Lights with other dimensions feel free to comment/ contact me so I can adapt the design for other sizes too.

My tealight (base) dimensions: 37 mm diameter & 19,5 mm height.

I already testprinted all critical parts and made sure that the Design will fit together nicely! (Printed on A1, X1C & Prusa XL)

U can decore it with some greens!
 

Printing Instructions:

I printed all parts with PLA ,4 mm Nozzle ,2 mm layer height.

Don't overtighten the threads. Since this Design has no technical requirements I did not design it to withstand an hurricane ,-)

If you are goin to use real candles I would highly recommend to use a metall/ glas container around them and print the Arms + Candleholder in PETG. This design is made with LED Lights in mind.

Snap into place and threaded components.

You have the option to print the parts with single colors or in multicolor.

Have fun!