January 2, 2022
Description
This is a pretty simple print, You just need some glue to hold the pieces together.
It is based off the real JWST with the outer ring of tiles tilted more towards the center.
Print first one “JWST Keychain Base”, make sure the layer height on the inclined tiles supports is small to avoid “stairsteps”.
After that print 18 of the “Hex Tile”, preferrably in silk gold for the best effect.
When the prints are done just glue the tiles in place and it's done! The tip of a pair of tweezers is enough spacing between the tiles. By design they should be around 0.4mm apart from each other.
IF YOU LIKE THIS MODEL I ALSO HAVE A COMPLETE JWST MINIATURE!
License:
Creative Commons — Attribution — Noncommercial
TheIgorMC
