December 15, 2024
Description
I needed an inline switch for some 12v accessory lines on one of the printers. I had some 12v illuminated toggle switches that used a 20mm hole, so I drew up a housing to use them.
No supports are needed during print. M3 cap head screws are used for assembly. The switch used was one of these: https://www.amazon.com/gp/product/B07T1JG6BD
Fusion 360 source & .STEP files are included as well as .STL files.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Nikdfish
