Honda Civic EG, Del Sol, Upper Ball Joint Boot

This is a model of the upper control arm ball joint boot for the Honda civic EG and Del Sol. I modeled the walls to be 1mm thick and it seems to come out perfect for a boot, if anyone installs it let me know how it holds up.

I modeled a little indention on the bottom of the boot so you can use a zip tie or metal clip to hold it to the metal stud so grease stays in the boot. Oh also, this boot might fit the lower ball joint too but I'm not 100% sure, I know they are similar though.

NOTE: You will obviously need to print in TPU or some other flexible filament since it's a boot, plastic won't work on this part.

Category: 3D Printing

If you would like to leave a small tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ