December 19, 2024
Description
This has been designed to be used in combination with a poop chute (i recommend this one):
https://www.printables.com/model/935600-anycubic-kobra-3-filament-poop-diverter-anycubic-k
When trying other poop chutes I found that when the filament is flung hard the poop can deflect off of the chute and onto the 3D printer rather than in the bin, therefore I made the following bin which as well as having a large storage area (takes up the legth of the printer and the width of the screen) also has a deflector plate to help “bounce” any deflected poops back into the bin.
The print is without supports and can use the default print settings.
The bin should also work with the screen at any tilt angle.
Version 2: Removed the vertical height extension to not interfere with the printer in some cases
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
MakeMeACake
