10" Rack mount for FRITZ!Box 6660 Cable

This is a mounting bracket for 10" racks that holds the bare PCB of a FRITZ!Box 6660 Cable.

It's recommended to have one 1U slot free before installing this. The FON1 and USB ports are sticking out of the PCB, so it has to be inserted in an angle.

Requires two M3 Bolts to secure the PCB in place on the bracket.

I used 2mm thick fiber like: https://www.amazon.de/dp/B09JBF5WDK (PMMA Seitenglühend Glasfaserkabel 2mm)

Print settings:

• PETG (The FRITZ!Box will happily melt PLA :D)

• Layer height: 0.30

• Perimeters: 4

• Infill: 20%

• Pattern: Rectilinear

Modeled from scratch but used the designs linked in remix section as inspiration:

• “Fiber optic LED extension idea” from 3DPrintsBF

• “Beefy mounting plate design” from DivinePrint