Planter 02 with drainage holes

I wanted the planter with drainage holes, so I made a remix. Major credits go to the original creator https://www.prusaprinters.org/social/3373-wilko/about 

Print instructions:

• use vase mode
• lots of solid bottom layers. I had 15 (depends on your scaling. use slicer picture for reference)
• I used PLA (3dJake ecoPLA glitter brown), ASA with smoothing or PETg should be great too (or better ;-) )

Post print instructions:

• remove the designed in supports with cutter/pliers/nippers/.. . This are not so good to remove, but in the end it is not a big deal. 
• clear the holes you need  with cutter/drill

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.