Mantic Armada (Single) Tiny Ship Squadron Sea Bases

These are (Single) Tiny ship bases for the Orc, Basilean, Empire of Dust, Trident Realm and Twilight Kin - (Other fleets may be made at a later date - Time permitting as they are very time consuming to design believe it or not).

This idea was given to me by @PortableZomb_2701788 and it will also double your amount of fleet squadrons by only using 1 ship model ber base representing a squadron (instead of 2).

I primarily made these for use with their (My Mini Factory) MMF Campaign of 3D printed models as they don't come with bases (at the time of writing), but they are the same scale as the physical shop bought models, so these bases should work with those too.

All you need to do is paint the ship and base before assembly. Just put glue (I find UHU to be a good glue for PLA filament - you can also use superglue), onto the base. Make sure you only put it on the flat part with the name of the ship and don't use too much. Align the ship on the flat base and let it dry. Superglue does not give enough time to adjust your ship if needed. Leave overnight to dry and you have your ship ready to play with.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Ankermake M5 printer with Ankermake slicer v0.9.44_6 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.1 (Initial Layer @ 0.2) - Mine were printed @ 0.2 but don't look so good

Nozzle: 0.4mm

Print Speed: 250mm/s (Initial layer @ 50mm/s)

Nozzle Temperature: 230 Degrees (Initial layer @ 230 Degrees)

Bed Temperature: 65 Degrees (Initial layer @ 75 Degrees)

Infill: 10%

Supports: No

Skirt: Yes - x4

Brim: No

Raft: No

Enjoy.

                                     https://www.buymeacoffee.com/tigertone