Samsung dishwasher basket adjustment

Update 2018-04-03
New stronger version of the 'back' pieces

Replacement casing for Samsung dishwasher basket adjustment. Keep the handle, spring and screws from the old one.

Print with heat resistant filament. Standard PETG or ABS are not restitant enough (tested with heavy wash mode). Google for 'dishwasher resistant 3d print filament', you will find some topics about that.

For the part with the 'hooks', print the first 7,5mm at 100% infill to get the hooks strong enough.

Here are the settings (S3d) I used for printing these parts, free to you to adjust it !

General
Layer height : 0.2mm
Speed : 50 mm/s
Infill : 50% (except for the hooks section : 100%)

Support
Infill : 30%
Horizontal offset : 0,40mm
Upper and lower separations layers : 1

Category: Replacement Parts