Huge House - No AMS (or similar system) required

This monstrosity of a house is yet another installment in my series of lamp buildings I've been designing. If you have any question regarding having enough space, you're wrong. If this doesn't fit in your space, you're wrong.

Your issue isn't that you don't have space for this. Your issue is that you have too much other unimportant clutter that you need to purge to make way for THIS!

Look at its size compared to my Cozy Cabin!

This model makes use of Bambu Lab's Lamp Kit, but should accommodate any light source you have available to you.

Assembly Instructions:

Refer to the attached guide for assembly or refer to this video.

Printing Instructions:

Several components of this cabin utilize the "color swap" technique to mimic the capabilities of a multi-color printer. Anyone with a printer with pause capabilities can do color swaps.

There are 3mf files included that were created from Bambu Slicer that already have the settings below applied.

House:

• Layer Height: 0.2mm
• Supports: Tree/Organic supports

Windows and Sliding Doors:

• Layer Height: 0.1mm
• First Layer height: 0.1mm
• Supports: No
• Pause at layer 3 for color swap
• Pause at layer 33 for color swap

Everything else:

• Layer Height: 0.2mm
• Supports: No

As always, if you see anything wrong or have feedback, let me know!

For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.

Feel free to join my discord for additional support, questions, or suggestions!