December 22, 2024
Description
Wenn euch meine Arbeit gefällt, würde ich mich über euren Support freuen, damit alle Inhalte kostenfrei bleiben.
Buy me a Coffee …
Ko-Fi … https://ko-fi.com/lagnor69
Pay Pal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE
--------------------------------------------------------------------------------------------------------------
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x50mm and 132x132mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kingroon Red Transmission Distance: 4.2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #15 (1.28mm) swap to Yellow for the rest.
License:
Creative Commons — Attribution — Noncommercial
Lagnor69
