Fan Grill and Beacon Cable Guide Remix

Basically I copied Corneliu's design into FreeCAD because I couldn't figure out how to edit the Fusion 360 model. The guides are at a 45 degree angle to be easier to print and with a broader bend radius. The USB cable is a tight fit but gets in there.

I installed it on my IDEX and it works well to keep the Beacon USB cable tight to the toolhead and not flop around. Please ignore my splice on the 4024 fan cable, I gave up on the crimps and just soldered it (but was successful in crimping the second toolhead fan).

The photo shows how tight the cables can get to the back of the printer, so having them well secured is a good idea.