Shower Rod Fixture

I needed a new fixture for my shower rod because the rubber grip had stopped working. The rod would often fall during a shower, causing a mess. This new fixture solves that problem and also makes cleaning the shower curtain easier, as the rod can now be removed without needing to untighten it.

printed in ASA Carbon Fiber from Eryone
 

0.4mm Nozzle on Creality K1C using Orca Slicer

0.2 mm Layer Height

3 Walls 

4 top layers

4 bottom layers 
I've included an .stl you'll need to clone the part in your slicer to have 2 pieces which you will need for the shower curtain rod to be suspended properly

a .3mf with the settings I used for the ASA
I would advise loading your own filament profile if you have good settings or want to use another type of filament as ASA runs significantly hotter than PLA, PETG ect