December 24, 2024
Description
Hexagons maker everything better!
Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping material, and hang them on your wall. They provide a stylish looking option to reduce reverb (echo) in your environment and tone down any harsh frequencies you may have.
Mine were hung with "Command Strips" on the side flanges, but I've also added a keystone hole to the top point for those who wish to use a screw for hanging. Intended to be stuffed with cloth wrapped 1.5 Inch thick sound insulation (38.1mm).
See the full design in action and how it goes together in this video:
This design REQUIRES VERY SPECIFIC PRINT PARAMETERS! Please pay attention to the "Recommended Print Settings" section below!
Design fits a 210 mm build volume.This is a REMIX of my larger Prusa XL version that is intended to fit on the Prusa i3 Printers or the Bambu X1/P1/A1 (full size not Mini). Multicolor will require that capability of the machine as well. 3MF files are included with the Required slicer settings for both Prusa Mk4S & Bambu X1 Printers. You should be able to dial in your machine off of those settings. The Prusa 3MF is intended to be opened in PrusaSlicer, the Bambu 3MF in BambuStudio or OrcaSlicer. Multicolor on the Prusa i3 version is with the MMU3, I don't own one of these so I cannot test it unfortunately, as such that is an untested file and purge tower size may be an issue.
Parts To Make (Affiliate Links):
Files Included:
Recommended Print Settings:
Hex Panel Frame:
Inner "Infill" Panel:
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/links
Want to more directly support my work? Please consider checking out Patreon!: https://www.Patreon.com/MandicReally
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MandicReally
