Karaoke Microphone Stand from broomstick

Upcycle a broom stick into a telescopic microphone stand

Standard telescopic broom handle with 24mm thread

Base with 27.2mm hole for 27mm interference fit with broom handle

(Remove the hook if present)

Render

Printing

Microphone Clip and Broom Screw Cap Adaptor 

Printed in two pieces and assembled with M3x10 screw

The screw provides additional structural support for the heavy Mic.

STL models offered with and without M3 Insert

Weighted Stand

The Stand Prints upside down without supports.  

I used a 0.8mm nozzle  to speed up print time with 0.4mm layer height.

Add plenty of Top Layers to increase weight & reduce center of mass.

I aimed for Total weight of 400g and works well - especially at kids height.