That's What I Do, Drink Beer

This model was created oversized for various reasons. You can use the generic model and scale the x/y in your slicer, or I've included versions that are reduced 70%. I included both .stl and .smf.

An attached image shows the part and color designations. The ‘M’ prefix is related to the mug. There are black outlines and white highlights. The ‘Liquid’ prefix is related to your chosen beer color, which will also be used for the letter ‘hollows’ if desired. All of the letters have prefixes for the text line number followed by the actual letter. 

For this model I printed it on an OPXL5H using input shaper and .4 nozzles. Layers were .25 structural and you can either make all the layers solid (4 top/bottom) or use a sparse infill if you want it sort of translucent.

If you have a dry sense of humor, then print the ‘E’ of FORGET the same color was the liquid.