Tiny Books Bookshelf (with Tiny Books included)

UPDATED 1/3/2025: Fixed clearance issue on bottom two shelves. Sorry about that. Also added Tiny Books design files, so you can print your own books.

A simple bookshelf for the tiny dollhouse-scale (1:12) book props. Has a separate base that can be glued to the main body for additional stability. Each shelf holds 20 books, or about 120 books per full bookshelf. You can add text or additional decor to the top semi-circular region in a mesh editor or the slicer.

This was made for “books” with the following dimensions:

21mm tall
2.1mm wide
17mm deep

If you don't have any Tiny Books, I've included STL and FreeCAD files that let you print your own Tiny Books that fit the bookshelf. There is a OnePiece book STL that can be printed on its side without supports, as well as a separate STL for the book cover and the internal "pages", for easier multi-color printing, or if you just like having a loose cover flap for aesthetics.

NOTE: If printing the separate book cover STL, you'll probably have to turn on "Detect Thin Wall" to get the cover to print, because it is very thin (0.25mm).

Bookshelf and book STL and FreeCAD (v1.0) files are both available for use and remixes.