I made this because of the style of the faucet and the style of my sink. My sink has a smaller end to the left and a bigger/deeper end to the right. The reason why this faucet with this style sink makes it an issue is because of where the head of the faucet originally was made it too close to the wall end of the sink and thus, made it bad to scrub and clean medium to larger pots and pans. Especially with how the faucet head streams water, which is straight down.
Extending it out by 75mm helps make this so much easier to clean pots and pans now. If you have a large sink with this style faucet, this should help you. Requires no extra hardware.
- Everything can be printed out of PLA
- 5% or 10% infill
If you need the head to sit closer longer, let me know. I can always boot up Solidworks and shrink the bracket closer and then upload to back to this model page. For right now, I'm just uploading the size I'm currently using for my faucet and sink.
Piro Fyre
