Lemmy Motorhead Plaque

Lemmy from Motorhead.

Print in 0.2 mm layers at an infill density of your choice. Make colour changes after every 2 mm of completed print (i.e. at 2.2 mm and 4.2 mm). I used grey, white, then black.

No supports or brim required although you may wish to add a brim for peace of mind. Reduce the print size according to your needs.

Add negative volumes in Slicer to slot in magnets or simply use double-sided sticky tape to attach to a flat surface. 

He was Lemmy, and he played rock ‘n’ roll!