December 26, 2024
Description
To reduce the main bearing interface stiction of Marci's great mount for the Hadley telescope, I designed these adapters that accept standard 4mm OD 2mm ID (4x2) PTFE tubes.
My print settings:
PLA
0.1mm layer height
100% infill
Note: print these laying on the side, using supports for the pin. This ensures that there is no layer change between the fragile pin and the plate.
To mount the adapter use M4x20 or longer
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Twiegel
