Proxmark3 X Case

The cutouts for buttons and switches may look oversized, but making them any smaller makes them very difficult to operate.

Print with a 0.4mm nozzle. For the main body, print standing on its open end. For the lid, print on its face.

The lid can be affixed with 2xM3x8 bolts

It's quite a tight fit, but the Proxmark3 X is removable if you pull on one of the posts with some pliers.

Be careful upon insertion - the buttons protude slightly beyond the circuit board. A channel has been made to help with this, but printer tolerances could still cause the buttons to catch on the case during insertion, leading to a risk of them snapping or being ripped off.