Nova - Led Lamp

The model is designed to be printed in translucent PET-G for a spectacular radial lighting effect. The black internal core provides an elegant and modern contrast, while its compact dimensions (height 10 cm, maximum base diameter 8.3 cm) make it ideal for any space, from the patio to the bedside table.

Its versatility makes it perfect for creating a romantic atmosphere during a candlelit dinner, illuminating tables in restaurants, bars, and cafés, or as a bedside light for a relaxing read before sleep. The durability of the material also makes it suitable for outdoor use, in patios or gardens.

Nova is the lamp that lights up your special moments, creating unique and personalized atmospheres.

Recommended materials:

The prototype was made with translucent PET-G and black PLA filaments.

Dimensions:

• Height: 10 cm
• Maximum base diameter: 8.3 cm

Assembly notes:

It is recommended to use a COB-type LED strip for uniform, dot-free lighting. Do not exceed 5V 1A power and prefer dimmable strips for optimal light intensity control.

Printing and assembly instructions:

• For the lampshade: Use translucent or transparent PET-G, 0.4 mm nozzle, 0.2 mm layers, enable thin wall detection, 2 perimeter loops, 0% infill, normal supports only from the build plate, 40° overhang threshold, and remove protrusions.
• For the internal core and top cover: Use the same settings as above, but disable supports. Do not use a brim. For better bed adhesion, use hairspray and ensure the bed is properly leveled.

Assembly:

• Thread the power cable through the hole at the base of the internal core.
• Slide a piece of heat-shrink tubing onto the end of the cable. Solder the LED strip to the cable.
• Pull the cable back through the hole in the core and fix it using the adhesive backing of the LED strip, spiraling it along the core.
• Secure the ends of the strip with a small amount of hot glue.
• Apply a small amount of hot glue around the base of the core and insert it into the lamp, ensuring the notch at the base of the lamp aligns with the power cable.
• Apply a small amount of hot glue on the top cover and close the lamp.