Build Plate Rack for Creality K1

Introduction

This model is a rack for storing up to 4 build plates on the side of your Creality K1.

Assembly is done with just 4 pcs. M3x8 (slightly longer than the original screws).

Features:

• Each build plate is slightly raised from each other, making it easier to select one.
• Room for wiggle, making it easier to see the texture of each plate.
• Internal slanted edge for easy tilting of the desired plate.

Assembly

1. Print both LeftComponent and RightComponent (oriented with a flat surface down).
2. Remove the 4 original screws from the side panel.
3. Insert 2 pcs. M3x8 into each component and tighten then to the side panel. 
4. Beware not to overtighten!

Happy printing!

Feel free to post makes, leave a like, a comment or any questions you might have :D
Happy printing!