Truma E2400 Heater Exhaust Cover D95mm

I had this second hand gas heater, the Truma E2400, but this part was missing and it appears to be smaller in diameter than the spare parts you can buy ….

So I designed one (from pictures & measurement of the parts you screw it on) and made some little improvements, be sure to check if it the size you need:

• External diameter is 95mm
• Screw hole centres are 72mm apart

I recommend using something like PC to print. 

Very hot & humid air comes out of it so PLA will not have a stable shape and will end up breaking.