December 28, 2024
Description
Print with:
0 tops layers
0 bottoms layers
Whatever infill and percentage you want-that is what creates the design.
Use 2 M3 heat set inserts for the screen magnets
Place face down with supports only for the screw holes
The large middle sections have to be printed diagonally
In my pictures I used Honeycomb infill at 22% for the middles and Adaptive Cubic at 20% for the side pieces.
These will also get rid of the front USB ports and wifi antenna hole for a cleaner look. I relocated the USB to the rear.
License:
Creative Commons — Public Domain
7
Chase
