ER-11 collet holder PROTOTYPE

NOTE: This model has NOT been tested due to no need for us to use it. Make this at your own risk. Adjustments can be made by request, but we don't intend to work on this otherwise. It's offered as-is.

Suggested settings: ("engineering" profiles if your slicer has that) - slow = accurate

Nozzle: 0.4mm or 0.6mm

Layer height: 0.1mm - 0.15mm

Material: Any (the stronger, the better)

Infill: Cubic (20-40%)

Walls: 3+

Print speed: 30mm/s