Fully 3D-Printed phone stand - No Screws Needed

Fully 3D-printed Phone stand that is adjustable and Printable with no support material.

You don't need screws to assemble it, however, some glue would be optional!

Variant 1:

Most pieces fit together, and you may not need any Glue. but if you choose to print the version with the X-bracket and back holder being separate(the same as the photos), try to centre the first one on the back side of the holder that doesn't have a chamfer on the edge and glue them together.

* For more ease of use, download the file (Phone Stand v1 .3mf)

Variant 2:

If you don't want to use any glue. you can print the file named (Holder.stl), But then don't print files named (X-Bracket.stl) and (Back-Holder.stl)

* For more ease of use, Download the file (Phone Stand V2 .3mf)

The Version you see in the photos is Phone Stand v1.