January 23, 2025
Description
Fully 3D-printed fume extractor that is easy to print and doesn't require any support material.
You may be able to build it with no glue or any hardware tool, other than a 120mm fun that you could buy or just salvage from an old PC.
If you hate your life, but you have confidence in your 3d printer, you can 3d print the M5 screws.
If you are just a normal person, then you can use 4 M5x35mm Screws to secure the 120mm fan between the mesh.
Don't forget to put a piece of Carbon filter on the back of the fan, otherways the filter won't filter because there is no filter. is it clear?
I didn't add a place for an ON/OFF switch, but you can glue it to the fan itself or just don't use one, I may publish an enhanced version ASAP to address all the current flaws.
Did you forget something? The like button maybe?
License:
Creative Commons — Attribution — Noncommercial
8
GreenBit
