MonteCristo Memories Cigar Case

This case was designed specifically to fit the MonteCristo memories cigars. Though it could easily be modified to suit all thicknesses up to ~10cm in length.

I have designed the threads to be fairly compensatory to printer with less tight tolerances to ensure the cap should not need much alteration.

Printing

I highly suggest you AVOID using supports around the threads, and ensure you ENABLE Avoid Crossing Perimeters. 

You will benefit from printing these sequentially, as to achieve a better finish on circular parts - unless you have a really dialed in printer, you would likely see some artifacting. 

Last note, depending on your wall thickness, you may wish to enable a full layer every X layers in your infill settings for more strength in the tube, just in case it is sat on.