QIDI Plus4 - Poop Slide with magnetic detachable Trash Cans

Another poop slide for the Qidi Plus 4. This one can be printed in one part as it comes ready with break away supports. It features detachable trash cans in two sizes.  The trash cans are held in place by 5 small magnets on each side (10 in total). The neodym magnets are available on a large vendor site named after greek female warriors for as little as 0.4 Euros per piece. Their specifications are: cylindrical body with a diameter of 4mm and a length of 6mm. The magnets can be glued in their snug fit holes, as rear openings are provided to release air and maybe surplus glue. In case you get the polarity wrong, these small openings also come in handy for dissembly of the magnets by a straightened paper clip for as long as the glue hasnt dried. This poop slide is fully compatible with my High Airflow Rear Vent Shield, as promissed.

How to print: Layer height of 0.2mm is good, every part has a flat side, thats all there is to mention.

How to assemble: Thats allmost self explanatory from how the parts are arranged in the provided picture. The upper right of the original rear vent shield screw is used to fix the slide in place. Furthermore, the use of a strip of double sided adhesive tape to fix the elongated rear of the slide to the printer outer wall is recommended. 

What to understand: You modify your printer at your own risk. Dont blame any person other than yourself if things go wrong.