Box for drill stoppers (by @cewo) (6.5-13mm)

After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid.

I've printed this with some generic PETG on a Bambu Lab P1S using the standard 0.2mm setting. No supports needed. I import both STL files as one part with the box at the top. Then the slicer will make sure text inlay is printed correctly.

Magnets used are 6x3mm neodymium.

Drill stoppers can be found here.