1/10 RC Touring Car Setup Station

This is designed to be an into setup station if you want to get into touring cars but do not want to spend the money on all of the setup tools. Please note the actual metal setup stands are going to be more accurate. The accuracy will depend on the quality of the printer and your settings. 

IT IS CRITICAL YOU PRINT EACH PART IN THE ORIENTATION ABOVE TO GET THE BEST ANGLE MARKERS. 

• All station parts were printed with at least 3 perimeter walls and high density infill for strength. 
• You will need 2 normal wheel mounts and 2 mirrored 
• Top plate is held together by 2 M3x8 screws
• The base can be printed however you want. I removed top and bottom solid infill.

Expect future updates if I find anything that needs changing.