Slim desk drawer

Slim drawer for mainly use with a Prusa Enclosure, or you can use it with a classic desk.

You can use one (with two (L+R) sliders) or two drawers (with three (L+center+R) sliders).

Install sliders by glue / by double-sided adhesive tape / by 6x M3x12 screws (sliders are designed for threaded inserts M3 (diameter 4, length 5 mm), or you can use M3x15 screws with a nuts)

Printing recommendations:

• PLA, or PETG
• 0.2 mm layer height
• 3 perimeters
• no supports needed