January 25, 2025
Description
Flat frame grind block has two mounting holes. Utilizing those, theese walls can be printed in smaller parts. In addition of a 250mm aluminium core + hardware, you only need two Flat frame grindblocks and four 8mm axle bolts.
Flat 58mm setup. (Bigger inner wheels might touch frame bolt).
3mf file precut to fit Prusa Mini+ (18x18cm print bed) 0.6mm nozzle. One bed / wall.
You will need to trim the wheel holes with 10mm drill bit to get a firm fit for the hardware. (Or just use a sharp knife to open them a bit, if you dont care for a perfect fit.)
More about Core frame system: https://5050frames.com/core-system. (I have no affiliation).
License:
Creative Commons — Attribution
11
kalevamos
