Parkside mitre saw stop block

Original design leaves a lot to desire, so I designed a simple block which you can put on the support rail, slide it along and tighten with a thumbscrews in place. It will widen the range up to about 35cm. Obviously, you can use it on both sides of the saw. 

• Extra hardware required is 2x 5mm heatinsert and 2x M5x16 HH screw
• I'd recommend to print from PETG here, so it can withstand some rough handling
• There are some tiny supports
• PrusaSlicer file, it can have issues in clones/forks