Heat Set Insert Plug for M3

If you are like me and you printed all of the parts needed for the Cadet Pedals BEFORE you realized all the holes were too big for the M3x0.5 Heat Set Inserts called for in the BOM... then this will save your day. Just print (8) of these and press fit into the original holes and now your M3 Heat Set Inserts will fit properly and allow you to weld them in with your hot iron and tip! Speaking of tip, I had to turn on "Detect Thin Walls" in Prusa Slicer since these walls are so thin.

Once Vince updates the original models I will delete this thing as it will be no longer needed.

Here is a link to M3 inserts https://www.amazon.com/gp/product/B087NBYF65/ref=ppx\_yo\_dt\_b\_asin\_title\_o05\_s00?ie=UTF8&psc=1

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.20

Infill:

Filament:
E-Sun PLA Black

Category: Hobby