Front Panel Ikea Lack Table 3 Buttons (with Prusa Logo)

I wanted to have a nice front panel for my Ikea Lack Enclosure with some buttons to turn on the printer, some LED and the Raspberry Pi.

I designed this really simple front panel with three holes (20mm) for the buttons and on the other side, added the Prusa logo to make it nicer :)

The Switches that I used are from Mountain Switch (Model : R13-135). You can find them with or without the light and also in other colors. I find them on Mouser Electronics and they ship Worldwide.

There is two STL, one for the buttons and the other with the logo. I put the two on the gcode and you can print them together on the same plate.

Modify it as you want and Rate it if you downloaded it :)

Don't hesitate to leave a comment if you have a question and a Make if you made it.

Thanks for the support

UPDATE 1 :
I added some supports on the back of the front panel due to the pressure on the buttons

UPDATE 2 :
I Installed mine with some strong double sided tape and there is enough contact surface to hold the pieces and nothing moves. Everything works fine.

UPDATE 3 :
I made a second version of the buttons side to fit some round M19 switches that you can find here : https://www.ebay.com/itm/1pc-Metal-Flat-Blue-Led-Push-Button-Waterproof-Resetable-Switch-19mm-QN19-C5-/223013789312

Print instructions

Print in 0.15 or 0.2 with the front face down to have a nice first layer.

Use supports from the build plate for supporting the bezels and the holes.

Be patient during approximately 14 hours and don't forget to eat gummy bears and to drink water :)