MVLR Logo (single extruder multi-color)

Important : Use z-hoping (2mm) to avoid collision
*do not remove prints from build plate between prints* 

Make sure every print is centered, yes print face down.

• I printed @ 0.28mm layer height
• Disable supports
• Disable build plate adhesion (you can use brim for the first print but disable for others)
• Enable z-hoping (2mm)

G-code might not register the outline of the red layer and only print the letters, that's by design. The red outline is really thin and is only included to center all models evenly on build plate

Heres a video on using z-hoping for smooth multi-color prints with single extruder : https://www.youtube.com/watch?v=0Sla-vIsvh4