Filament dry storage adapter for Kichly Storage v2

NOTE: Please take care to ensure that you match the download to your version of the box. We have seen at least two versions; one sold in 2024 until early 2025, and one sold from 2025, that is still as far as I know, current.

Hygrometer holder snaps onto the front of the dessicate box, holding in the lid.

Wanted a snug fit to the bottom of these (Amazon UK) Kichly cereal storage containers.

Please ensure that you download the correct version of your box; many thanks to @beachview_542634 for helping work out the differences. The differences can be observed on the lids:

And on the bases (I cut mine up to measure):

Printing:

• DOUBLE CHECK THE PRINT FILES MATCH YOUR MODEL OF CONTAINER

• PLA is fine.

• Print Infill first on at least the first 0.9mm of the bases to handle the tricky overhang. No brim, and arachne walls.

• Print Hygrometer holders back down onto the bed.

• The v2 no longer need supports to print. If you are printing the v1 the tabs at the front of the base WILL need support.