Bionicle Mask of Ultimate Power

Model TL;DR

Recommended versions

moup_titan_5.0_runes_new (large/symbols as seen in the render)
moup_titan_5.0_smooth (large/no symbols)
moup_5.1_villager_runes (small/symbols as seen in the render)
moup_5.1_villager_smoot (small/no symbols)

File name explanation:

titan: larger, suitable for the jto Makuta combiner
villager: smaller, suitable for villager/toa characters or display next to other masks
runes: symbols on the mask similar to the ones on the other legendary masks
smooth: smooth surface like the prototype models

Since the runes are small you'll need a resin printer or a ~0.2 mm nozzle if you want to print a runes version.

This is a re-upload since the original wouldn't show up in a regular search.
Original (OUTDATED): https://www.thingiverse.com/thing:4617598/files

25/26.10.2021 added some clarification to the file naming scheme

09.07.2021 Added a 2.0 version of the short chin version, which should fix the fitment issius.

17.06.2021 Added 5.1 extended runes versions. They are located at the bottom of the files as i consider them a variant and not a design iteration.

03.03.21 Added 5.1 versions for the villager masks which should fit a G2 head.

08.02.21 Added the 5.0 variants which should have more accurate Horns. !! 5.0 villager variants will not fit on a G2 head !!

13.11.2020 Added a Version With a shorter chin. The files are loated at the bottom of the files section.

3.11.2020 Fixed the 4.0 versions and cleaned up the order in which the files are presented. The newest versions are: moup titan 4.1;moup titan 4.1 runes; moup villager 4.0; moup villager 4.1 runes.

24.10.2020 Added 4.0 and 4.0 runes. The runes copy the design of the other legendary masks from G2. however the details are quite small so you might run into problems when printing. The regular 4.0 has slightly different side horns with more square-ish fronts.
All 4.0 versions are currently untested.

08.10.2020 I added 3.0 files with fixed ears. the villager scale mask fits somewhat lose however it should withstand normal use.

08.10.2020 I added new 2.0 versions of the masks which should be more accurate and are less awkward on a G2 head. However I decided to keep the old designs in case you prefer them.

This is meant to be an alternative for the mask of ultimate power by Cyberhand or other creators.
It is probably not the most accurate version but it is cheaper than most other versions.

If you want to customize the mask or make it more accurate go ahead but feel free to upload your Variant.

If you decide to print one I would love to see a make.

The designs have been mosly tested (exept 5.0 variants) and they fit a G2 head just fine.

Category: Models