Holder for XTAR VC4 Plus Battery Charger for French Cleat

This is a holder for the battery charger XTAR VC4 Plus to mount it on a French cleat wall.

I printed it in PLA and I recommend using organic supports as shown in one of the pictures.

To assemble you'll need M4x8.1 threaded inserts and M4 counter sunk screws between 16mm and 20mm long (I used the latter, which is as big as you can go, but I tested 16 and I believe it grabs enough material).

The French cleat is assumed to be 18mm deep and at 45 degrees. If you need at a different depth (or angle), the designs are included (or just ask me and I'll add it).

You can get the XTAR VC4 Plus here: https://amzn.to/40hxxuS

I bet it'll also fit the XTAR VC4SL (https://amzn.to/40jPSYf), XTAR VC4 (https://amzn.to/4fPwjLY), and XTAR VC4H (https://amzn.to/3W4jHd1) but I haven't tested since I don't have those chargers. If you do, can you please leave a comment so we all know?

If you are not sure which threaded inserts to get, this kit contains what you need, and a lot more, as well as the tool for the soldering iron to install them: https://amzn.to/40uJhup. And this kit contains the right screws: https://amzn.to/4iYFInh.