Samsung Galaxy S8 Active g892 case

Originally published here: (WIP) Samsung Galaxy S8 Active g892 case by tato_713 - Thingiverse

Thanks to Eryn Hribal for testing this case. This test case was made for the Samsung Galaxy S8 Active; the case for the regular S8 is here; and the one for the S8+ is here. The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Not tested.
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.
• Aired: It is widely opened in the back so that the phone can dissipate the heat easily. 
• Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip.

References

• GSMArena

I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me by donating to this PayPal account.