Dragon Ball Z - Goku HueForge V2

This is an improved version of my previous attempt 

This design gets the most of HueForge using ColorMatch, which creates a more defined model and colours.

I've added a picture to see both models compared. 

The new one is also a thinner model which makes it more subtle and 2x faster to print. 

I've included the STL this time just in case you want to play with it.

I hope you enjoy it!

----

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 90.03x160mm in size
You may print at higher layer heights below the Min Depth of 0.32mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Brown
    At layer #5 (0.48mm) swap to Jade White
    At layer #12 (1.04mm) swap to Red for the rest.

If you resize the model make sure you do NOT scale the Z axis

-----------

Please leave a rating or comment if you like the print!

Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire

You can check out the rest of my designs here: https://www.printables.com/@asniaire

If you'd like to support my work, you can buy me a coffee :)