Nintendo switch games case - holds 12

I couldn't find a nice enough storage case to print to hold my switch games, so I made this one.

It can hold 12 games. 

There are 2 holes in the backside if you ever want to mount the thing on a wall or else…

The gcode file provided should be all set up to print if you want to go that route. I printed on an Mk3S. There are 3 color changes programmed (different colors for the backplate, case cutouts area, front plate and nintendo switch text/logo).

Otherwise you can print whatever way you want using the STL file.

This is meant to be printed standing up, the back side facing the build plate (nintendo logo facing up). This will allow you to print the logo a different color. If you prefer to print flat, it will print fine but you won't be able to print the logo a different color…

I printed this without supports just fine, even in the upright position.

The print Settings I used

Printer:

i3 Mk3s

Rafts:

No

Brim : 

Yes

Supports:

No

Resolution:

.2mm

Thick bridges :

Yes

Infill:

15% (cubic)

Filament brand:

Prusament

Filament material:

PLA

Filament color:

Lipstick red, galaxy black, vanilla white