Tabla Hook/Crotchet Grip

A grip to make a hook for replacing or tightening the tabla puri. The one in the photo got a bit small, so the 3D-file is 30 mm wider, which should be enough to use it with one or both hands.

This grip is made for hooks with the thickness M8, available on Ebay and you need a nut for M8 as well. You want to rasp off the end of the hook for easier use. First glue in the nut, and after the hook. PLA, ASA, ABS or similar with at least 4 layers and 25+% infill recommended and use support for the nut-enclosure at the bottom. PETG without CF not recommended because it doesn't stick well to any glue I know.