DNA 75 Box Mod | Squonk BF Bottom feeder | 18650 | Vape E-cig

I just wanted to design and 3d print a squonker with an "unconventional" layout and it turned out better than I expected!

Parts Needed:

x3 screws for the dna chipset

x1 screw for the circuit cover

some foam to put between the board and the lcd display

x2 battery spring connector for 18650 li-ion battery, I bought a battery holder (keystone like) and broke it to take the springy contacts. Please note that the contact will need some modification to fit (see photo).

The 510 connector that I've used have a 12mm wide threaded part and a 16mm wide top.

Evolv dna 75 (https://www.evolvapor.com/products/dna75)

18 and 16 gauge silicon wire

Printing:

All files are oriented in (what i think is) the correct position for fdm printing, the body and also the door need support.

Final note:

For locking the door you'll need to insert the right part first and then swing it close.

Happy printing and vaping!

Print Settings

Printer:

Longer lk4 pro

Rafts:

Supports:

Yes

Resolution:

Infill:

30

Filament: Prusament PLA GalaxyBlack

Category: Other