January 5, 2025
Description
The original holder built into this soldering station was a bit too small and somewhat impractical for my needs. This is a new one, printed using PLA+. The design requires one M4 insert, 6x 50mm aluminum pipe fi8mm, and an M4 screw for fixing it into the station.
No modifications to the station itself are needed. The stand is designed to fit the housing perfectly and is secured with an M4 screw inserted into the original cable holder slot. The cable holder is then attached to the stand using the M4 insert.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Jarek P.
