Werewolf - wall art

Werewolf, old + young - wall art

Easy to scale, easy to print.

To hang freely, please scale by 400% in the Z direction -> 4mm

The models can be printed solid …

Printing settings:

• Nozzle diameter: 0.4 mm
• Layer height: 0.2 mm
• Perimeter: 3
• Top layers: 3
• Bottom bottom layers: 4
• Filling: 15%

… or just as a contour only.

Printing settings:

• Nozzle diameter: 0.4 mm
• Layer height: 0.2 mm
• Perimeter: 11 at 100%,  7 at 60%
• Top layers: 0
• bottom layers: 0
• Filling: 0%

If there are problems with the print plate adhesion, the printing speed of the first layers can be reduced.

Wall mounting

For the best 'effect', the contrast to the wall should be as great as possible.

The glue clips can be used for hanging.

Directly on the wall

attach an glue clip in the middle of the upper part.

At a distance from the wall

Attach two glue clips on the right and left and connect them with a piece of filament. The distance from the wall can be adjusted using the distance between the glue clips and the length of the piece of filament.

Please use picture hooks or nails to hang it up