Cover Retainer Clip - Fits various Honda/Acura Models

The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer.

Must be printed in the orientation modeled - if printed with the circular part on the build plate, the layer lines are not strong enough, and the part breaks.

Recommended print settings:

• Layer Height: 0.2 mm or less
• Infill % : 80+
• Supports: Yes
• Support Type: Organic/Tree, on build plate only
• Print Orientation: Default as modeled - this is critical for strength
• Material: PETG
• Raft: Optional
• Brim: No