Toilet paper paper-dispenser

While I started printing with resin, I needed paper towels to remove the mess.
And because toilet paper was such a thing during lockdown, I decided to print a dispenser for single toilet paper pieces.
You have to remove the inner cardboard roll in the toilet paper roll and use the end on the cardboard roll to feed it through the dome.
Here in germany we also have the option to buy toilet paper without the cardboard roll.
There is a Inlay to make it possible to just pick one piece of paper.
It must be printed out of TPU.
Everything is screwed together with 4 M4 x 12mm screws, wich screw directly in the dome.
You can also print it without the dome, and fix the TPU inlay with m4 nuts.
The Housing can be mounted with M5 screws.

Print Settings

Printer:

own build

Rafts:

Supports:

No

Resolution:

Infill:

20

Category: Household